Discover What Makes BONITex® Stand Out
Successful osseointegration does not only depend on the design of a product and the selection of its materials. It is a process that is also significantly influenced by the properties of the implant surface and is an essential prerequisite for the long-term success of an endosseous implant. The biological behavior of the implant surface is defined by its topography and chemical composition.
With BONITex®, CanTech's CTD-alphatech implant products will offer superior protection against wear and corrosion, as well as enhanced biocompatibility for improved patient outcomes. This coating technology provides exceptional adhesion, enabling CTD-alphatech implant products to maintain their performance and longevity for longer periods.
Coating Technology
The BONITex® coating is comprised of a subtractive and an additive surface treatment. The subtractive process is comprised of HA blasting and double acid etching. The additive component of the BONITex® surface is a completely resorbable, thin, fine-crystalline and firmly adherent calcium phosphate coating (BONIT®).
Description Of The Surface
The BONITex® coating is comprised of a subtractive and an additive surface treatment. The subtractive process is comprised of HA blasting and double acid etching. The additive component of the BONITex® surface is a completely resorbable, thin, fine-crystalline and firmly adherent calcium phosphate coating (BONIT®).
Application Spectrum
Dental implants
Advantages of the Procedure
- Complex surface design with significant surface enlargement
- Higher wettability with blood/high affinity for blood
- Increased primary stability with reduced healing time
- Active support of bone attachment
- Possible diversification of indications (early loading/immediately loading)
- Increased bone-implant contact in early stages (14 to 30 days) after implantation
- Highly biocompatible (BONIT® coating)
- Highly pure surface without contaminations (Implant Study University of Cologne)
Properties
- Color: light gray
- Coating thickness: 5±3 µm
- Porosity: 60 %
- Adhesion strength: ≥ 15 MPa
- Ca/P ratio: 1.1±0.1
- Microstructured surface topography
- Bioactive resorbable CaP coating based on Brushite for additional surface enlargement
- Increased bone implant contact values between 14 to 30 days after implantation
- Highly biocompatible (BONIT® coating)
Contact us to learn more about how BONITex® is delivering better outcomes for patients!
